Plasma Cutting Machine Penang

Features:

• Automatic Overload Protection Function; prevent machine from damage if the duty cycle is exceeded or air flow is blocked
• Deep welding pool, beautiful welding seam
• Integrated wired feeder and powe
• Smooth and spatter-free start
• User-friendly, high welding speed
• Voltage control
• Simple-to-Use

Features:

• Low cost and energy saving.
• Pulse-width Modulation (PWM) technology; high frequency, high cutting speed.
• Post-flow Cooling Circuit; extend the life of the consumables and torch by cooling them with post-flow air after the trigger is released (15-20s).

Features:

• Low cost and energy saving.
• Pulse-width Modulation (PWM) technology; high frequency, high cutting speed.
• Post-flow Cooling Circuit; extend the life of the consumables and torch by cooling them with post-flow air after the trigger is released (15-20s).

Features:

• Low cost and energy saving.
• Pulse-width Modulation (PWM) technology; high frequency, high cutting speed.
• Post-flow Cooling Circuit; extend the life of the consumables and torch by cooling them with post-flow air after the trigger is released (15-20s).

Features:

• Low cost and energy saving.
• Pulse-width Modulation (PWM) technology; high frequency, high cutting speed.
• Post-flow Cooling Circuit; extend the life of the consumables and torch by cooling them with post-flow air after the trigger is released (15-20s).

• 100% Genuine Parts
• Plasma Power Source:  Powermax65/Powermax85/Powermax105
• Torch:  Duramax Torch
• Amperage: 15 - 105 Amps
• A pack of 5 genuine long life Hypertherm plasma torch electrodes for the Duramax torch
• Used with the Powermax 45XP plasma cutter
• Designed for Duramax®, Duramax

• 100% Genuine Parts
• Plasma Power Source:  Powermax65/Powermax85/Powermax105
• Torch:  Duramax Torch
• Amperage: 45 - 65 Amps
• A genuine Hypertherm plasma torch shield for the Duramax torch
• Used with the Powermax 45XP plasma cutter
• Used for drag cutting
• Castleations allow contact

• 100% Genuine Parts
• Plasma Power Source:  Powermax65/Powermax85/Powermax105
• Torch:  Duramax Torch
• Amperage: 85 Amps
• Genuine hypertherm 220816 hand and machine plasma cutting nozzle 85 amp for powermax 85 and powermax 105 plasma cutting machines
• For use with hand and mechanised

• 100% Genuine Parts
• Plasma Power Source:  Powermax65/Powermax85/Powermax105
• Torch:  Duramax Torch
• Amperage: 65 Amps
• Genuine Hypertherm 220819 65amp cutting nozzle
• Used on the powermax 65, 85 and 105 for handheld and mechanzied plasma cutting
• The temperature of the plasma arc exiting

• 100% Genuine Parts
• Plasma Power Source:  Powermax65/Powermax85/Powermax105
• Torch:  Duramax Torch
• Amperage: 10 - 105 Amps
• A pack of 5 genuine Hypertherm plasma torch electrodes for the Duramax torch
• Used with the Powermax 45XP plasma cutter
• The electrode provides power to the

• 100% Genuine Parts
• Plasma Power Source:  Powermax65/Powermax85/Powermax105
• Torch:  Duramax Torch
• Amperage: 10 - 105 Amps
• A genuine Hypertherm plasma torch retaining cap for the Duramax torch
• Used with the Powermax 45XP plasma cutter
• The part holds the swirl ring, nozzle and

• 100% Genuine Parts
• Plasma Power Source:  Powermax65/Powermax85/Powermax105
• Torch:  Duramax Torch
• Amperage: 45 - 65 Amps
• A genuine Hypertherm plasma torch swirl ring for the Duramax torch
• Used with the Powermax 45XP plasma cutter
• The swirl ring controls the swirling action of the

• 100% Genuine Parts
• Plasma Power Source:  Powermax65/Powermax85/Powermax105
• Torch:  Duramax Torch
• Amperage: 45 - 65 Amps
• A pack of 5 genuine Hypertherm plasma torch drag cutting nozzles for the Duramax torch
• Used with the Powermax 45XP plasma cutter
• The nozzle focuses the plasma

• 100% Genuine Parts
• Plasma Power Source:  Powermax 125
• Torch:  Duramax Hyamp
• Amperage: 30 - 125 Amps
• Genuine Hypertherm 220971 Plasma Electrodes for Powermax 125
• Intended for used with Hypertherm Powermax 125 plasma cutting machines with the Duramax Hyamp torch
• These electrodes

• 100% Genuine Parts
• Plasma Power Source:  Powermax 125
• Torch:  Duramax Hyamp
• Amperage: 125 Amps
• Intended for cutting at 125 amp either drag & mechanized cutting
• Intended for used with Hypertherm Powermax 125 plasma cutting machines with the Duramax Hyamp range of torches
• The

• 100% Genuine Parts
• Plasma Power Source:  Powermax 125
• Torch:  Duramax Hyamp
• Amperage:  45 - 125 Amps
• Hypertherm Duramax Hyamp retaining cap 220977 is  intended for cutting at 125 amp either drag & mechanized cutting
•  Intended for used with Hypertherm Powermax 125 plasma

• 100% Genuine Parts
• Plasma Power Source:  Powermax 105
• Torch:  Duramax Torch
• Amperage:  105 Amps
• Compatible With: Powermax® 105/HRT/HRTs/MRT
• Genuine Hypertherm plasma torch nozzle 220990 is for use with the Powermax 105 plasma cutting system and Duramax hand torches
• Hypertherm

• 100% Genuine Parts
• Plasma Power Source:  Powermax 105
• Torch:  Duramax Torch
• Amperage:  45-85 Amps
• Use with the Powermax 105 plasma cutter and Duramax hand torches
• Operating range is 85 – 105 amp
• Genuine Hypertherm consumable spare parts deliver the best cutting quality and

• 100% Genuine Parts
• Plasma Power Source:  Powermax 105
• Torch:  Duramax Torch
• Amperage:  45-85 Amps
• This swirl ring from Hypertherm has an operating range of 85 – 105 amps and fits all Duramax torch models
• Part number 220994 is designed for use with the Powermax 105 plasma cutting

• 100% Genuine Parts
• Plasma Power Source:  Powermax 125
• Torch:  Duramax Hyamp
• Amperage:  45-125 Amps
• For use with Hypertherm Powermax 125 plasma cutting machines with the Duramax Hyamp torch
• These swirl rings are intended for cutting and gouging up to 125 amp drag & mechanized

• 100% Genuine Parts
• Plasma Power Source:  Powermax 125
• Torch:  Duramax Hyamp
• Amperage:  125 Amps
• Hypertherm Duramax Hyamp cutting shield 420000 is  intended for drag cutting at 125 amp
• Intended for used with Hypertherm Powermax 125 plasma cutting machines with the Duramax Hyamp range of

• 100% Genuine Parts
• Plasma Power Source:  Powermax30 XP
• Torch:  Duramax LT
• Amperage:  15-30 Amps
• A genuine Hypertherm plasma torch retaining cap for the Duramax torch
• Used with the powermax 30XP plasma cutter
• Holds the swirl ring, nozzle and electrode in place
• Directs

• 100% Genuine Parts
• Plasma Power Source:  Powermax30 XP
• Torch:  Duramax LT
• Amperage:  15-30 Amps
• A genuine Hypertherm plasma torch shield for the Duramax torch
• Used with the Powermax 30XP plasma cutter
• Castleations allow contact between the workpiece and the shield during the

• 100% Genuine Parts
• Plasma Power Source:  Powermax30 XP
• Torch:  Duramax LT
• Amperage:  15-30 Amps
• Used with the Powermax 30XP plasma cutter
• A pack of 5 genuine Hypertherm plasma torch nozzles for the Duramax torch
• The nozzle focuses the plasma arc by funneling gas